| Al | Sn | Cu | Pb | Cd | Si | Ni | Zn | Mg | Sb | As | Mn max. |
Fe max. |
Cr max. |
Sr max. |
Ti max. |
Bi max. |
Other max. |
||
| AlSn20Cu SAE783 |
Rem. | 17.5-22.5 | 0.7-1.3 | - | - | 0.10 | - | - | - | - | 0.5 | - | - | 0.1 | - | 0.15 |
|
||
| AlSn6Cu SAE770 |
Rem. | 5.5-7.0 | 0.7-1.3 | - | - | 0.7 | - | - | - | - | 0.7 | - | - | - | 0.3 |
|
|||
| SAE780 | Rem. | 5.5-7.0 | 0.7-1.3 | - | - | 1-2 | 0.2-0.7 | - | - | - | 0.01 | 0.7 | - | - | 0.1 | - | 0.15 | ||
| SAE-787 | Rem. | 0.4-2.0 | - | 3.5-4.5 | - | - | - | - | - | 0.5 | - | - | 0.1 | - | 0.3 | ||||
| F-861 | Rem. | 0.5-1.5 | 0.5-1.0 | 5-8 | - | 1.5-3.0 | - | - | - | - | - | 0.1 | 0.25 | - | - | 0.1 | - | 0.15 | |
| F-817 | Rem. | 15-20 | 0.7-1.3 | 1-2 | - | 0.30 | - | - | - | - | - | 0.1 | 0.4 | - | - | 0.1 | - | 0.15 | |
| F-818 | Rem. | 16-21 | 0.7-1.3 | - | - | 0.30 | - | - | - | - | - | 0.1 | 0.4 | 0.1-0.3 | - | 0.1 | - | 0.15 | |
| F-830 | Rem. | 27-33 | 0.6-1.0 | - | - | 0.30 | - | - | - | - | - | 0.1 | 0.4 | - | - | 0.1 | - | 0.15 | |
| F-780 | Rem. | 1.5-3.0 | - | 20-25 | - | - | 0.50 | 0.50 | 0.50 | - | - | - | - | - | - | - | 0.50 | ||
| SAE12 SnSb8Cu4 |
Max.0.005 | Rem. | 3-4 | - | - | - | - | 7.5-8.0 | 0.1 | - | 0.1 | - | - | - | 0.08 | 0.2 |
|
||
| SAE13 PbSb10Sn6 |
Max.0.005 | 5-7 | 0.7 | Rem. | 0.05 | - | - | Max.0.005 | - | 9-11 | 0.25 | - | 0.1 | - | - | - | 0.1 | 0.2 | |
| SAE14 PbSb15Sn10 |
Max.0.005 | 9-11 | 0.7 | Rem. | 0.05 | - | - | - | 14-16 | 0.6 | - | 0.1 | - | - | - | 0.1 | 0.2 |
|
|
| SAE15 PbSb15SnAs |
Max.0.005 | 0.9-1.7 | 0.7 | Rem. | 0.02 | - | - | - | 13.5-15.5 | 0.8-1.2 | - | 0.1 | - | - | - | 0.1 | 0.2 |
|
|
| SAE48 CuPb30 |
- | Rem. | 26-33 | - | - | 0.50 | 0.50 | - | 0.50 | - | - | - | - | - | - | - | 0.5 | ||
| SAe49 CuPb24Sn |
- | Rem. | 21-27 | - | - | 0.50 | 0.50 | - | 0.50 | - | - | - | - | - | - | - | 0.5 |
|
|
| SAe792 CuPb10Sn10 |
- | 9-11 | Rem. | 9-11 | - | - | 0.50 | - | 0.50 | - | - | - | - | - | - | - | 0.5 |
|
|
| SAE793 CuPb10Sn10 |
- | 3.5-4.5 | Rem. | 7-9 | - | - | 0.56 | - | 0.50 | - | - | - | - | - | - | - | 0.5 |
|
|
| SAE794 | - | 3-4 | Rem. | 21-25 | - | - | 0.50 | - | 0.50 | - | - | - | - | - | - | - | 0.5 |
|
|
1) Based on ISO standard, AlSn20Cu has% 0.7 max Si% 0.7 maxMn, %1 max Fe, 1% max Si+Fe ,%1 max Si+Fe+Mn. 2) Based on ISO standard, AlSn6Cu has no lower limit to Ni,0.7 max Mn, 0.2 max Ti, %1 max Si+Fe+Mn. Another version of this Alloy has, %0.05-0.15Cu, %0.05-0.15 Mg , %0.2-0.4 Mn. 3) A version of this alloy has 2.8 max. Sn. 4) A version of this alloy has 3.0 max. Zn. 5) A version of this alloy has 0.8 max. Zn. 6) A version of this alloy has 3.0 max. Zn. 7) A version of this alloy has 1.3 max. Sn. 8) Based on ISO Al and Zn are 0.01 max. 9) Based on ISO Pb is 0.35 max. |
|